Award BIOS Setup Program
23
H. Soft-Off by PWR-BTTN
When set to Delay 4 Sec., this function allows the power button to put the system
in Suspend, a power saving mode. See Section 2-4 for operation instructions of
the over-ride power button operation wich puts the system in Suspend mode.
When set to Instant-Off the Soft-Off by PWR-BTTN function is disabled and the
computer turns completely off when the power button is pressed.
I. Wake Up
By PCI Card
When enabled, a PCI interface that receives a signal will wake up the system from
soft off and green mode.
J. Power On By Modem
When enabled, a modem that receives a ring signal will wake up the system from
soft off and green mode. You should connect the modem to the COM port
and turn on the resume event in green mode.
L. USB Port Wake Up From S3
When enabled, all USB devices will resume event from suspend (S3) mode.
M. Resume By Alarm
When enabled, this setting allows the system to turn back on at a designated
time of the month. User must designate date of month and time of day. This
function is only available when using an ATX power supply and the Software
Power-Off function to turn off the computer. See the Software Power-Off Control
in Section 2-4 of this manual for instructions.
