Chapter 2
10
Onboard LAN (JP11)
This function allows you to enable and disable the on board
LAN. You must set the jumper's cap to pins 1-2 to enable or
set pins 2-3 to disable this function.
CD-ROM Audio-in (CN2)
Use the audio cable enclosed with your CD-ROM disk drive to
connect the CD-ROM to your mainboard. This will enable your
CD-ROM's audio function.
Auxiliary Audio-in (CN3)
This connector is for use with a secondary CD-ROM, DVD-ROM
or CDR/CDRW disk drive.
Audio Mono-in/out (CN4)
This connector is used for Add on Card e.g. modem with Mono
in/out connector.
WOL (Wake-on-LAN) Connector (CN5)
Enable the Wake Up On LAN selection in BIOS's Power
Management Menu to use this function. This header is used
to connect an add-in NIC (Network Interface Card) which gives
WOL capability to the mainboard.
Blue LED Connector (CN17)
This feature work entirely the same as
the power indicator LED,
both shows the system's power status. The only difference is that
this one is blue while the other is red LED.
USB 0/1 Ports and USB 2/3 Connector (USB1/CN20)
If you want to use a USB Keyboard, you must enable the USB
keyboard support function in BIOS's Integrated Peripherals menu
(See Section 3-4). This board contains a USB Host controller and
includes a root hub with two USB 1/2 ports a connector for
optional USB Adaptor (USB 3/4).
L
1
R
GND
NC
GND
ISOLATEB
