27
Instruc
tion manual
System Interface
1. back button
(previous screen)
2. knob
3.
OK
button (to confi rm operation or access main menu)
4. DISPLAY
Display symbols:
- (
) Summer
- (
) Winter
- (
)
Heating only
- (
)
OFF, system off
- (
) Time program
- (
) Manual operation
- (
)
Desired room temperature
-
(
Room temperature detected
- (
)
Desired room temperature override
- (
)
Outdoor temperature
- (
SRA
)
SRA function enabled
- (
)
HOLIDAY function enabled
- (
)
Central heating active
- (
)
Domestic hot water active
- (
) Error
indication
- (COMFORT) Comfort function enabled
- (
) Menu
- (
) CH
settings
- (
)
DHW settings
- (
) System
performance
- (
) Screen
setting
- (
)
Floor Heating
- (
) Circulation
pump
- (
) Valvola
deviatrice
- (
S2) Low indirect cylinder sensor
- (
S3) High indirect cylinder sensor
- (
S4) Under-fl oor heating system thermostat
- (
) Anti-frost
function
- (
)
Thermal Cleanse Function
- (
) Confi
gurable
device
- (
) Heat
pump
- (
)
Heating element 1
- (
)
Heating element 2
- (
)
Heating element excluded
- (
)
excludes the heating element during the high energy
rate period, in the presence of the appropriate signal only
in heat pump systems
- (
)
sets the reduced set-point during the high energy rate
period, in the presence of the appropriate signal only in
heat pump systems
- (
) BOOST
mode
- (
) Silent
mode
- (
) Special
function
OK
1
2
3
4
Initial start-up
The fi rst time the EXPERT CONTROL system interface is connected,
the user is required to choose certain basic settings.
First, you will need to select the user interface language.
Turn the knob and select the desired language, then press the OK but-
ton to confi rm. Move on to setting the date and time. Turn the knob to
make a selection, press the OK button to confi rm your selection, turn
the knob to set the value.
Press the OK button to confi rm.
Save the settings by pressing OK.
Press the OK button to access the Menu. Use the knob in the centre
to scroll through the menu list and select a parameter, then press OK
to confi rm.
NOTE
Some parameters are protected with an access code (safety code)
which protects the boiler settings from unauthorised use.
Содержание ARIANEXT
Страница 35: ......
