7
Assembly Instructions
Assemble Anchor caps
Attach Anchor caps (S),
one for each side of Base
tube.
Attention
Check and tighten all
screws!
Attach Slide to the
ground
Attach the Slide to the
surface by digging two
35/35/35 cm dimension
holes and fill it with
concrete.
After hardening drill two
holes in the concrete
blocks (according to
distance between holes
with anchor caps, and fix
the slide.
Insert Plastic Plugs (U)
into the holes and secure
the Anchor Caps (S) with
Screw (V) and Washer (T)
for each hole.
Step 11
Step 10
x2
S
fill with
concrete
U