Chacon 34234, Руководство пользователя

Страница: 6 / 36

4. Use of the product
4.1. Battery low
When the battery is low, the smoke detector warns you by emitting a repetitive beep and
flashing for around 30 days. Replace the batteries with one of the types recommended in the
paragraph on “Technical specifications”
- Remove the smoke detector from mounting bracket by turning it anticlockwise.
- Install the new battery as shown in point 1. Introduction to the product
- Test the alarm using the test button every time you change the battery.
4.2. Fault warning mode
If the smoke detector is not working properly, it moves into “fault warning” mode. Attempt
to clean the smoke detector (see maintenance). If you do not see any improvement and it
remains in fault mode, replace the smoke detector!
Mode LED signal Sound signal
The device is working
correctly
1 x every 32 seconds None
The device is in “test” mode 1 x every second 3 times,
with a 1.5 second pause
between each flash
1 x every second 3 times,
with a 1.5 second pause
between each beep
The device has detected
smoke
1 x every second 3 times,
with a 1.5 second pause
between each flash
1 x every second 3 times,
with a 1.5 second pause
between each beep
The battery is low 1 x every 32 seconds 1 x every 32 seconds
The device is not working
correctly
1 x every 32 seconds 1 x every 32 seconds