5
G
E
T
T
IN
G
S
T
A
R
T
E
D
S
A
F
E
T
Y
/
S
P
E
C
IF
IC
A
T
IO
N
S
A
S
S
E
M
B
L
Y
/
IN
S
T
A
L
L
A
T
IO
N
O
P
E
R
A
T
IO
N
T
R
O
U
B
L
E
S
H
O
O
T
IN
G
M
A
IN
T
E
N
A
N
C
E
/
R
E
P
A
IR
•
Do not use the Model 9661616 Hydraulic Press for any use
other than its intended application. Improper use of this
tool revokes and voids any real or implied warranty. The
manufacturer is not responsible for any injury that may result
from improper use of the machine.
•
Do not force an attachment to do a job it was not intended or
designed for.
•
Never stand on the machine or work in an awkward position.
Maintain your balance. Never lean against the machine, over
reach or use excessive force when working. You could tip or
fall into the machine causing serious injury.
•
Know your tool. Learn the tool’s operation, application and
specific limitations. Never force the machine to do a task it
was designed for.
•
Use recommended accessories. Understand and obey all
safety instructions supplied with accessories. The use of
improper accessories may cause risk of injury to persons.
•
Always use guards and eyeshields.
SPECIFICATIONS
Model 9661616 50 Ton Electric Hydraulic Press
Capacity (tons)
50
Stroke travel (inch)
8.7
Ram diameter (inch)
1.5 (or 2.25 with ram cap)
Table Size (inch)
16x20 with 4” dia. hole
Max distance ram to table (inch)
27
Head movement
No
Dimension (inch)
35x14x62
Weight (lbs)
705
RPM
3450
Volts
230
Amps
13
K
W
/HP
2.2
/3
Phase
1
Operating temperature °F (°C)
50-122 (10-50)
ASSEMBLY/INSTALLATION
Power source
•
The motor on this machine is designed for operation on
the voltage and frequency specified. Normal loads will be
handled safely on voltages not more than 10% above or
below specified voltage.
•
Running the unit on voltages which are not within the range
may cause overheating and motor burn-out. Heavy loads
require that the voltage at the motor terminals be no less than
the voltage specified.
Electrical connections
Make sure unit is turned off and
disconnected from power before
performing service or maintenance actions on the machine.
This machine must be grounded. To avoid
electrocution or fire, any repairs to
electrical system should be done only by a qualified
electrician, using genuine replacement parts.
Electrical safety
•
This machine must be grounded in accordance with the
National Electrical Code and local codes and ordinances. Any
electrical work must be handled by a professional, qualified
electrician. To help prevent and protect the user from shock,
this machine must be properly grounded.
•
Confirm that power supply matches power requirements of
the machine before any electrical connection is made to the
machine. Before connecting the machine to a power source,
ensure that the switch is in the off position.
Lifting and setting up your machine
Make certain that slings, cables, chains,
forklifts or other load suspending gear or
machines used to move this unit are properly rated to
handle the weight. The machine is extremely heavy.
The machine must be properly secured
and anchored before use. Make sure that
it is supported equally on all four corners. Failure to comply
may result in the machine twisting and causing binds in the
working table.
1.
The machine arrives assembled and ready to us except
that it requires proper electrical wiring to be installed. Have
an authorized electrician prepare an electrical box near the
machine’s installation location.
2.
Remove any crating or overpacking materials which may be
covering the machine. Leave the machine attached to the
pallet.
