MAINTENANCE
Steps required to keep the saw in optimum operating condition
have been described under “Operating Instructions.” The Safety
Precautions should be performed before operation.
For proper maintenance:
• Keep saw clean and dry. Sweep off spots where chips have
collected.
• Lubricate the unpainted surfaces with a light application of
medium consistency machine oil to prevent corrosion after
cleaning.
• Replace dull blades and blades from which teeth have been
stripped. A clean saw with a sharp blade will yield the best cut.
• Internal parts of the band saw have been completely lubricated
at the factory and do not need to be relubricated.
Make certain that the saw is
disconnected from the power source
before attempting to service or remove any component.
Any attempt to repair the motor may
create a hazard unless repair is done by
qualified service technician.
12
G
ET
TI
N
G
S
TA
R
TE
D
SA
FE
TY
/
SP
EC
IF
IC
AT
IO
N
S
A
SS
EM
B
LY
/
IN
ST
A
LL
AT
IO
N
O
PE
R
AT
IO
N
TR
O
U
B
LE
SH
O
O
TI
N
G
M
A
IN
TE
N
A
N
C
E
/ R
EP
A
IR
NORSE Operating Manual & Parts List 9683124
9683124_oipm_En011_9643312.01 03/21/18 Page 12
