Adjust the zero automatically.
Inflating and measuring automatically.
Display and save the results automatically.
2. Press the “START/STOP” to power off, otherwise it will turn off automatically within 1
minute.
THE OPERATION OF RECALLING RECORDS
Recalling the records
1.Please press the “MEM” to show the average of the record.
The sign of "AVG" will show in the right corner.
2.Press the “MEM” or “SET” to get the record you want.
The order of the record, date, time will display alternately.
It means the total of records is 8,
the current is the No 2. The corresponding date is 10th November.
The corresponding time is 10:38.
CAUTION
The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other records
are pushed back one digit (e.g., 2 becomes 3, and so on), and the
last record (60) is dropped from the list.
THE OPERATION OF RECALLING RECORDS
Deleting a measurement record from memory
If you did not get the correct measurement, you can delete all
results by following below steps.
1. Hold pressing “MEM” for 3 seconds ,the flash display will show.
2.Press “SET” to confirm deleting and the monitor will turn off automatically.
3.If you don’t want to delete the records, press “START/STOP” to escape.
4. If there is no record the right display will show.
INFORMATION FOR USER
Tips for measurement
It can cause incorrectness if the measurement are taken in the
following circumstances.
Wait at least 1 hour after dinner or drinking
Immediate measurement after tea, coffee, smoking
Wait at least 20 minutes after taking a bath
When talking or moving your fingers
In a very cold environment
When you want to discharge urine
INFORMATION
Maintenance
In order to get the best performance, please follow the below instructions.
Put in a dry place and avoid the sunshine
Avoid touching water, clean it with a dry cloth in case.
Avoid the intense shaking and collision
Avoid the dusty and unstable temperature Environment
Using the wet clothing to remove the dirt
