11
2st Type of Label with reset button
With this Type of Label, is possible to
make an AP MODE reset with the
panel, or use reset button behind the
left hole in the label, as in the photo
Reset Button:
•
Use a thin metal rod (Ø=1mm)
•
Hold pressed the “Reset Button” for more than
10 seconds (Mother board will make a sound)
•
Wait few seconds to finish reset procedure
Reset from the control panel:
•
Go to the “Info Menù”
•
Go to the “IP” or “IP Address” entry
•
Hold pressed the “Menù Button” for more than
10 seconds (Mother board will make a sound)
•
Wait few seconds to finish reset procedure
Automatic Reset with the router off isn’t available.
Problem with Smart Wifi
If your smartphone has the Smart Wifi management,
there could be some problem with the module wifi
configuration. For fix this problem follow the
procedure below:
Put WiFi module in AP Mode (Reset).
