December 2018
1000-4298 Revision 1.0
www.ceva-dsp.com
© 2019 CEVA, Inc. All rights reserved
2 / 11
The mode selection is made with S1 switch on board. The default configuration is UART-SHTP mode.
2.
Running a PC Demo Application
2.1.1.
Requirement
Running Freespace™ MotionStudio 2 with FSP200 Serial/USB Adapter board requires the following
items.
•
Windows PC
•
FTDI driver (Windows PC may not find the right driver) available in
https://www.ftdichip.com/Drivers/VCP.htm
•
USB Type A to Micro-B cable
•
Freespace™ MotionStudio 2 application available in
https://www.hillcrestlabs.com/downloads/freespace-motionstudio-2
Connect USB Type A to Micro-B cable to FSP200 Serial/USB Adapter board and your PC. The USB Serial
COM port should appear in your Device Manager after the driver is installed properly.
Figure 2: Device Manager for USB Serial Port
Please note the configurations of the FTDI COM Port driver should be updated to optimize latency and
to improve overall performance.
Right click on the device entry and select
Properties
to bring up the properties windows.
Figure 3: USB Serial Port Properties Window in the Device Manager
