cetoni Qmix L, Руководство по оборудованию

Страница: 15 / 19

Qmix λ Hardware Manual
15
The intermediate piece is mounted next. The shortest intermediate piece is simply inserted into the
recess of the connection piece
①
. The two longer intermediate pieces are attached with the
corresponding screws (M2.5x10 or M2.5x25) using a 2mm Allen key
②
.
Make sure that O-Rings are mounted in the recesses of the intermediate piece on both sides. The PTFE
tubing can be used optionally.
Finally the second connection piece is mounted. When the shortest intermediate piece is used, the final
connection piece is screw mounted directly on the existing connection piece
①
. When one of the
longer intermediate pieces is used, the final connection piece is screw mounted to this
②
. Use the
corresponding M2.5x10 screws therefore.
Spring contacts
Schrauben M2,5x8 Schrauben M2,5x8 Schrauben M2,5x8 Screws M2,5x8
Shortest
intermediate piece
O-ring
PTFE-tubing
Longer
intermediate pieces
Screws
1 2
O-ring
PTFE-tubing