Cetetherm City
Connect the Round to internet via Gateway
3
1
Room thermostat Round
General
The room thermostat Round controls the supply temperature to the heating system.
First time the room thermostat is started is use default control mode Outside Temperature Control (OTC
control).
The room thermostat is programmable and has five different control modes to select between.
Features
•
Ergonomic user interface.
•
A simple twist of the dial will adjust the temperature set point up or down.
Picture 1
1
LCD display
2
Dial
3
Right touch button
4
Left touch button
Display (1)
The LCD has backlight; the backlight enables to read the data on the LCD in the dusk and dark.
The backlight is switched off 10 seconds after last use.
In operating mode 2 (OTC control) the set room temperature is displayed in the window.
In operating mode 1 and 3 (RTC and RTC+OTC), the current room temperature is displayed by default in the
window.
The thermostat measures the room temperature continuously in the room where it hangs.
Dial (2)
Turn the dial one "click" to see the setting of room temperature, if using control mode 1 and 3.
Turn the dial to change settings. Turn clockwise to increase and counter clockwise to decrease a setting.
Right touch button (3)
Use together with the left touch button to enter setting menu.
Left touch button (4)
Use together with the right touch button to enter setting menu.
Press
to change parameter values and settings in different menus, change control mode, set max supply
temperature, change heat curve slope.
