CET PMC-690, Руководство пользователя

Страница: 73 / 103

CET Electric Technology
73
41031 RW Order of Harmonic Calculation UINT16 2 to 63*
41032~41033 RW Reserved
41035 RW CT Clamp Specification UINT16
0*=5A (50A) @10mV/A
1=20A@10mV/A
2=200A@1mV/A
3=500A @1mV/A
4=500A(550A) @1mV/A
5=5kA @0.1mV/A
41036 RW Frequency UINT16 0=50Hz*, 1=60Hz
*Default
Table 5-43 Basic Setup Parameters
Notes:
1) The CT Polarity register defines the polarity for the Current Inputs as illustrated in the following table.
Bit 15~Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reserved I4 Ic Ib Ia
Table 5-44 CT Polarity Register
2) P.F. Convention: -IEEE is the same as IEEE but with the opposite sign.
Figure 5-1 Power Factor Definitions
3) There are two ways to calculate kVA:
Mode V (Vector method ):
2
total
2
total total
KVAR KW KVA
 
Mode S (Scalar method ):
c
KVA KVA KVA KVA
b a total
  
5.8.3 SMTP Setup
Register Property Description Format Range/Options
40900 RW SMTP Event Classification 1 Bitmap Note 1)
40902 RW SMTP IP Port UINT16 1 to 65535 (Default=25)
40903 RW IP Address of SMTP Server
2
UINT32 Default=0.0.0.0
40905 RW Source Email Address
3
CHAR Note 2)
40925 RW Source Username 4 CHAR
40945 RW Login Password 5 CHAR Note 3)
40955 RW Destination Email Address 6 CHAR Note 4)
Table 5-45 SMTP Setup Parameters
Notes:
1) SMTP Event Classification register determines if a newly generated Device/SOE LOG is sent out by email. The following table
illustrates the Bitmap definition of this register. When a particular bit is set to 1, its corresponding events will be sent out by
email.
Bit Classification Event Type Bit Classification Event Type
Bit 0 1=System Events See Appendix B
Device
Bit 16 0x81=Dip/Swell Disturbance
SOE Log
Bit 1 2=Standard Setpoints Events Bit 17 0x82=Transient Disturbance