Cessna 150 1968, Руководство пользователя

Страница: 15 / 56

manually reset type circuit breaker mounted directly on the back of the
lighter behind the instrument panel.
LANDING LIGHTS (OPT).
A three-position, push-pull type switch controls the optional landing
lights mounted in the leading edge of the left wing. To turn one lamp on
for taxiing, pull the switch out to the first stop. To turn both lamps on
for landing, pull the switch out to the second stop.
FLASHING BEACON (OPT).
The flashing beacon should not be used when flying through clouds or
overcast; the flashing light reflected from water droplets or particles in
the atmosphere, particularly at night, can produce vertigo and loss of
orientation.
CABIN HEATING AND VENTILATING SYSTEM.
The temperature and volume of airflow into the cabin can be regulated
to any degree desired by manipulation of the push-pull "CABIN HEAT" and
"CABIN
AIR"
knobs.
Heated fresh air and outside air are blended in a cabin manifold just
aft of the firewall by adjustment of the heat and air controls; this air is
then vented into the cabin from outlets in the cabin manifold near the
pilot's and passenger's feet. Windshield defrost air is also supplied by
a duct leading from the manifold.
A separate adjustable ventilator near each upper corner of the wind­
shield supplies additional outside
air
to the pilot and passenger.
PARKING BRAKE SYSTEM.
To
set parking brake, pull out on the parking brake knob, apply and
release toe pressure
to
the pedals, and then release the parking brake
knob. To release the parking brake, apply and release toe pressure on
the pedals while checking to see that the parking brake knob is full in.
2-5