Copyright CES 1998 Page 6 11/17/98
Table 2. Wiring Diagram
J13
Color
Description
Pin 1
Red
12 V:
Connect to the radio’s + ve supply.
Pin 2
Black
Ground:
Connect to 0V (Ground).
Pin 3
Orange
Ground:
Connect to 0V (Ground).
Pin 4
Yellow
Audio In:
Connect to the input Audio source, (audio positive).
Pin 5
Light Green
Audio In:
Connect to the input Audio ground, (audio negative).
Pin 6
Blue
Ground:
Connect to 0V (Ground).
Pin 7
Violet
Audio Output:
Connect to the (transmit) audio stage, after the
microphone clipper/limited stages, and before the modulator circuit.
Pin 8
Gray
Ground:
Connect to 0V (Ground).
Pin 9
White
Not Connected.
Pin 10
Brown
Mute Input:
This input can be used to turn off the audio output.
Pin 11
Dark Green
Not Connected.
Pin 12
White/Red
Not Connected.
Pin 13
White/ Blue
Serial Send Enable:
Serial Control of delay time.
Pin 14
Tan
Serial Clock:
Serial Control of delay time.
Pin 15
White/Green
Serial Send Data:
Serial Control of delay time.
For technical support call CES at the numbers below:
CES Wireless Technologies
925-122 S. Semoran Blvd.
Winter Park, FL 32792 USA
Phone: lnt. + 407-679-9440
Fax: Int. + 407-679-8110
E-Mail: [email protected]
Web Site: http://www.ceswireless.com
Copyright CES 1996. All rights reserved. Not to be reproduced in whole or in part without the written consent of
CES. All information contained in this document is carefully prepared and offered in good faith as a guide in the
installation, use, and servicing of our products. Installers must ensure that the final installation operates
satisfactorily, within the relevant regulatory requirements. We accept no responsibility for incorrect installation.
We reserve the right to change products, specifications, and installation data at any time, without notice. Printed
in the USA.
Limited Warranty
