© CES Wireless Technologies Corp
– 2008
Page
14 of 17
5.0
Dialing Preprogrammed Phone Numbers
The PT-101 can be preprogrammed with two phone numbers. These are the only phone numbers that the
device is capable of calling. It can receive a call from any phone number.
The first phone number can be any phone number. The second phone number should be programmed with
the correct emergency number for the region where the PT-101 will operate.
5.1
Dialing Phone Number 1
This is the phone number that is called when the Push To Call (PTC) button is pressed. To call the
number, depress the PTC button until the PT-101 beeps.
5.2
Dialing Phone Number 2
NOTE:
The PT-101 will allow emergency communications without a SIM card installed.
Initiating an emergency call is done by depressing the PTC
button and the “>” button (User Defined
button) simultaneously. The ON, GPS, and BAT LED’s will flash in unison. At this point, momentarily
release the PTC button and the CALL LED will flash. Re-depress the PTC button and confirm the LED’s
flash in unison again. Release the “>” and the PTC buttons.
