CERWIN-VEGA PROFESSIONAL
4
IMPORTANT SAFETY INSTRUCTIONS (continued)
1. The unit and power supply should only be connected to a power outlet that matches the voltage and frequency marked on the
rear of the unit.
2. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and exit points on
the unit.
3. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong provided for your safety. If the provided plug does
not fit into an outlet, consult a qualified electrician for replacement of the obsolete outlet.
4. If the mains plug supplying this product incorporates a fuse, then the fuse should be replaced only with one of identical or lower
rupture value.
5. Never use a damaged or frayed power cable; this can cause risk of exposure to lethal voltages.
6. The power cable of the unit should be unplugged from a wall outlet when it will not be used for a long period of time.
7. Only use attachments/accessories specified by the manufacturer.
8. To completely disconnect the power input, the mains plug of the speaker should be disconnected from the mains connection.
9. The mains plug of the unit should not be obstructed, so that it can be easily accessed during intended use.
DO NOT ATTEMPT SERVICING OF THIS UNIT YOURSELF. REFER TO QUALIFIED SERVICE PERSONNEL FOR SERVICING.
In the event that servicing is needed, make sure that any replacement parts used have the same characteristics as the original
parts and that routine safety checks have been performed to guarantee that the equipment is in safe operating condition.
REPLACEMENT WITH INCORRECT PARTS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER HAZARDS.
The unit should be serviced by qualified service personnel when any of the following happens:
– The power cord or the plug has been damaged.
– Objects have fallen onto or liquid has been spilled into the unit.
– The unit has been exposed to rain or liquids of any kind.
– The unit does not appear to operate normally or exhibits a marked change in performance.
– The device has been dropped or the enclosure has been damaged.
Keep speakers out of extended or intense direct sunlight; the driver suspension could prematurely dry out, and finished surfaces
may become degraded.
The speaker contains sensitive components. Do not drop, disassemble, open, crush, bend, deform, puncture, microwave,
incinerate, paint, or insert foreign objects into speaker.
The speaker is easily capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing damage. Caution
should be taken to avoid prolonged exposure to SPL in excess of 90 dB(A).
Operate and store the speaker in a place where the temperature is between -20° and 55°C (-4° and 131°F). Low or high
temperature conditions might cause the speaker to temporarily stop working. Avoid dramatic changes in temperature or humidity
when using the speakers, as condensation may form within the speaker.
Turn the speaker off when in any area with a potentially explosive atmosphere. Obey all signs and instructions, as sparks in such
areas could cause an explosion or fire resulting in serious injury or death. Areas with potentially explosive atmosphere are often,
but not always, marked clearly. Potential areas include fueling stations, areas where the air contains chemicals or partials
(including grain dust or metal particles), below deck on boats, and chemical transfer storage facilities.
The speaker contains small parts which may present a choking hazard to small children. Keep the speaker and its accessories
away from small children.