U120.0.1
2
1.0
Warrior Split Receivers RX#1 and RX#2
Warrior split receivers RX#1 and RX#2 are machine-mounted receivers intended for use on
industrial cranes and hoists. Seen below in the 900MHz FCC Part 15 license-free radio band,
the standard MU-X9 receiver is self-contained and preconfigured for bridge and trolley/hoist
control.
This split bridge trolley/hoist system is designed in such a way that the designated bridge
receiver (RX#1) provide main line contactor (MLC), warning/start, and three-contact bridge
motion control. The second receiver (RX#2) provides three-contact trolley and hoist commands
as well as its own mainline and warning start relay outputs that can be utilized, if desired.
Factory mounted 90dB warning buzzers (see Figure 1) may be included if purchased with the
primary system.
Figure 1. Warrior MU-X9 Receivers and 900MHz External Antennas
Warrior MU-X9 Receiver Features
Two Motion, Two Speed Control
Two Series MLC (Main Line Contactor) Relays
Dedicated Horn/Light and Start Relays
Compact Designed to IP65/IP67 Standards
900MHz @ 100mW No License Required Operation
Designed to ICS 8 NEMA Crane Specification
External Antenna
Self-Contained, Factory Pre-Configured Terminal Wiring
with Single Pigtail Harness
14 Screw Terminals for Optional Custom User Wiring
RX#1 Bridge/Mainline
RX#2 Trolley/Hoist
Optional 90dB
Warning Buzzer
