ETHOS Model Transmitter
2020 Cervis, Inc.
3
1.2 Battery Installation
Sample photo: display model shown
A rechargeable Lithium Polymer (LiPO) battery pack powers ETHOS transmitters. When
installed and fully charged, the battery supplies power to the transmitter for 80 continuous
operating hours. When installing the battery, be sure that the metallic battery contacts properly
align with those inside the unit.
To install the battery pack in the transmitter body:
1. Pinch the clamps on each side of the battery in.
2. Slide the battery pack into the transmitter body until you hear a click.
Note: Make sure the battery contacts are positioned relative to the front right side of the
transmitter.
To charge the battery pack
:
1. Pinch the clamps on each side of the battery in.
2. Slide the battery pack into the battery charger, as illustrated in Figure 3. (Make
sure the battery contacts are oriented correctly with those inside the charger.)
3. Plug the charger into a nearby wall socket.
The LED on the plug indicates charging status.
(Solid Red = charging. Solid Green = charged.
Maximum charging time = Five hours from zero charge.)
4. When the battery has finished charging, unplug the charger from the wall socket,
remove the battery from the charger base, and insert it into the transmitter.
