User Manual
©
2019 Cervis, Inc.
5
4.0
DIN-9XWxR-MOD Receiver Diagnostic LEDs and DIP
Switches
4.1
LEDs
The DIN-9XWxR-MOD receiver has four board-mounted system status LEDs that can be used
as diagnostics tools to verify operation. Removing the DIN-9XWxR-MOD faceplate allows
access to the LEDs. These LEDs (shown in Figure 4) are LED 1=Health; LED 2=TX; LED 3=RX
and LED 4=Association. See Table 2.
Figure 4. DIN-9XWxR-MOD LEDs
Table 2. DIN-9XWxR-MOD Diagnostic LEDs
LED
Name
LED State Description
1
Health
Blinking
Unit OK, normal processor operation
2
TX
(Transmit)
Flashing
Indicates radio frequency (RF) messages sent to handheld
remote transmitter
3
RX
(Receive)
Flashing
Indicates RF messages received from handheld
4
Association
Blinking
Used during association with a Warrior transmitter
