Cervis MRF450, Руководство пользователя

Страница: 17 / 21

User Manual

2014 Cervis, Inc.
11
ID Parameter Bytes Default Description
Mode 0x01 = RX. Fastest response. ~10 mA more than Idle.
0x0030 RX Filter
Options
1 0x00 Binary-encoded options.
1 If set, filter DST PAN against My PAN
2 If set, filter DST Address against My Address
4 If set, strip DST PAN from payload
5 If set, strip DST Address from payload
6 If set, strip SRC PAN from payload
7 If set, strip SRC Address from payload
If enabled, filter fields must match or the packet is silently
discarded.
Filtering options are processed prior to stripping options.
Enabling filtering on an address field that was not present
in the transmitted packet will result in erroneous packet
discards – filtering will be performed on the specified byte
locations regardless of location contents.
Enabling stripping on an address field that was not present
in the transmitted packet will result in erroneous payloads
– stripping will be performed on the specified byte
locations regardless of location contents.
0x0040 TX Options 1 0x01 Binary-encoded options.
1 If set, perform CCA before transmit
0x0041 CCA
Threshold
1 0x00 NOT YET IMPLEMENTED. CURRENTLY FIXED AT
0x20.
The RSSI value read by the module must be less than this
value before a transmit is performed. If the read RSSI
value is greater or equal, the module will back off a
random length of time (1 – 10 ms) and repeat. See
receive section for RSSI conversion formula.
0x0050 Operational
Mode
1 0x00 0x00 = Push-To-Transmit mode, unlicensed mode
0x01 = Periodic Transmit mode, licensed mode
The mode selected sets the modules maximum RF power
output. Push-To-Transmit mode complies with license-
free operation. Periodic mode is for licensed use only.
Please refer to section “6.0 Operational Modes” for details
and restrictions.