manualshive.com logo in svg

CERTIFIED 060-3742-2, Инструкция по эксплуатации, Страница: 24 / 57

Поделиться
Скачать
CERTIFIED 060-3742-2 Скачать руководство пользователя страница 24

 

model no. 060-3742-2  |  contact us 1-844-428-7277

24

oPE

rat

Ion

CaUtIon

Do not cover the machine while the engine and silencer are still warm.

aftEr USE

1.  Check for loose or damaged parts. 

If required, change damaged parts.

2.  tighten loose screws and nuts.
3.  brush all the snow from the machine.
4.  move all the controls backwards and 

forwards a few times.

5.  Disconnect the starting cable from the 

spark plug.

SErVICInG

SafEtY PrECaUtIonS

make sure the engine is off before you begin any 
maintenance or repair. this will eliminate several 
potential hazards:
•  Carbon monoxide poisoning from engine 

exhaust — never run the machine indoors. 
the exhaust fumes contain carbon 
monoxide, a very toxic gas. 

•  burns from hot parts — let the engine cool 

for 30 minutes before touching hot parts.

•  Injury from moving parts — read the 

instructions before you begin, and make 
sure you have the tools and skills required.

to reduce the possibility of fire or explosion, be 
careful when working around gasoline. Use only 
a nonflammable solvent, not gasoline, to clean 
parts. Keep cigarettes, sparks and flames away 
from all fuel-related parts. 

ma

Int

Enan

CE

Содержание 060-3742-2


























































Отзывы:

Нет отзывов