CERTIFIED 060-0740-4, Инструкция по безопасности и эксплуатации

Страница: 24 / 30

24
model no. 060-0740-4
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWING PERFORMANCE. A DULL BLADE DOES NOT
CUT GRASS CLEANLY OR MULCH PROPERLY. WEAR PROPER EYE PROTECTION WHILE
REMOVING, SHARPENING, AND INSTALLING BLADE. ENSURE THE MOWER IS OFF AND
THE CORD IS UNPLUGGED.
Sharpening the blade twice during a mowing season is usually sufficient under
normal circumstances. Sand causes the blade to dull quickly. If your lawn has
sandy soil, more frequent sharpening may be required.
REPLACE BENT OR DAMAGED BLADE IMMEDIATELY.
WHEN SHARPENING THE BLADE:
1.Make sure blade remains balanced.
2.Sharpen blade at the original cutting angle.
3.Sharpen cutting edges on both ends of blade, removing equal amounts of
material from both ends.
TO SHARPEN BLADE IN A VICE (SEE Fig. K)
Be sure the switch lever is released; the
blade has stopped and unplug the mower
before removing the blade.
1.Remove blade from mower. See instructions
for removing and attaching blade.
2.Secure blade K-1 in a vice K-2.
3.Wear safety glasses, sturdy gloves and be
careful not to cut yourself.
4.Carefully file the cutting edges of the blade with a fine tooth file K-3 or sharpening
stone.
5.Check balance of blade. See instructions
for blade balancing.
6.Replace blade on mower and tighten
securely. Refer to instructions below.
BLADE BALANCING (See Fig. L)
Check balance of blade by placing centre
hole in blade L-1 over a nail or screwdriver
shank L-2, clamped horizontally in a vice
K
K-1
K-2
K-3
L-1
L-3
L-2
L
MAINTENANCE