CERTIFIED 060-0739-0 Скачать руководство пользователя страница 7

Страница: 7 / 28

CORD
SET

APPLIANCE CORD

(A) TIE CORD AS

SHOWN

(B) CONNECT PLUG

AND RECEPTACLE

SAFETY INSTRUCTIONS FOR

WALK-BEHIND MOWERS

IMPORTANT

SAFE PRACTICES FOR

WALK-BEHIND MOWERS

GENERAL OPERATION

1. Read, understand, and follow all

instructions on the machine and in

the manual(s) before starting.

2. Do not put hands or feet near or

under the machine. Keep clear of

the discharge opening at all times.

3. Only allow responsible adults, who

are familiar with the instructions,

to operate this machine.

4. Clear the area of objects such

as rocks, wire, toys, etc., which

could be thrown by the blade. Stay

behind the handle when the motor

is running.

5. Be sure the area is clear of

bystanders before operating. Stop

machine if anyone enters the area.

6. Do not operate machine barefooted

or while wearing sandals. Always

wear proper footwear.

7. Do not pull machine backward

unless absolutely necessary.

Always look down and behind

before and while moving backward.

8. Never direct discharged material

toward anyone. Avoid discharging

material against a wall or

obstruction. Material may ricochet

back toward the operator. Stop

the blade when crossing gravel

surfaces.

9. Do not operate machine without

the entire grass catcher, discharge

guard, rear guard, or other safety

protective devices in place and

working.

10. Never leave a running machine

unattended.

11. Stop the motor and wait until

the blade comes to a complete

stop before cleaning the machine,

removing grass catcher, or

unclogging the discharge guard.

12. Operate machine only in daylight or

good artificial light.

13. Do not operate machine while

under the influence of alcohol or

drugs.

14. Never operate mower in wet grass.

Always be sure of your footing;

walk, never run.

15. Disengage the drive system, if

so equipped, before starting the

motor.

16. If the machine should start to

vibrate abnormally, stop the

motor and check for the cause

immediately. Vibration is generally

a warning of trouble.

17. Always wear eye protection when

operating machine.

18. See manufacturer’s instructions

for proper operation and

installation of accessories. Only

use accessories approved by the

manufacturer.

SLOPE OPERATION
Slopes are a major factor related to

slip and fall accidents, which can

PRODUC

T SAFETY

Содержание 060-0739-0





























Результаты поиска

Содержание 060-0739-0

Отзывы:

Похожие инструкции для 060-0739-0

Бренды по названию

Популярные бренды

CERTIFIED 060-0739-0, Инструкция по безопасности и эксплуатации

Результаты поиска

Содержание 060-0739-0

Отзывы:

Похожие инструкции для 060-0739-0

Бренды по названию

Популярные бренды