CertaUPS C500, Руководство по установке

Страница: 54 / 54

46
10 Glossary
Bypass AC source Source supplying the bypass line. The equipment can be
transferred to the bypass line if an overload occurs on
the UPS output, for maintenance or in the event of a
malfunction.
Frequency converter Operating mode used to convert the AC-power
frequency between the UPS input and output (50Hz ->
60Hz or 60Hz -> 50Hz).
Low-battery warning This is a battery-voltage level indicating that battery
power is low and that the user must take action to
prevent the imminent loss to the supply of power to the
output load.
Backup time Time during which the load can be supplied by the UPS
operating on battery power.
Load Devices or equipment connected to the UPS output.
HE mode Operating mode in which the load is supplied directly by
the AC source if it is within the tolerances defined by the
user. This mode reduces the consumption of electrical
power
Manual bypass Rotary switch controlled by the user used to connect
the loads directly to the AC source. Transfer of the load
to the manual bypass enables UPS maintenance
without interrupting the supply of power to the
connected loads.
Normal (double
conversion) mode The normal UPS operating mode in which the AC source
supplies the UPS which in turn supplies the connected
loads (after electronic double conversion).
Normal AC source Normal source of power for the UPS.
Relay contacts Contacts supplying information to the user in the form
of signals.
UPS Uninterruptible Power Supply.