C300R User Manual
Page 10
UPS INSTALLATION
INSPECTION
Every effort is made to ensure that CertaUPS systems are packaged as safely as possible to ensure that no damage is
incurred during shipment. Please visually inspect the UPS when it is received. Please keep all packaging in a safe place
for future use.
UNPACKING
The UPS unit must be positioned in a well-ventilated area that is free from excessive dust, heat and moisture. Please
take note of the specified operating temperatures and remain within these guidelines.
•
Unpacking the unit in a low-temperature environment may cause condensation to occur in and on the
device.
DO NOT
install the UPS/EBM until the inside and outside of the device is clear of condensation.
•
The UPS/EBM is heavy. Follow any special precautions provided on the carton.
•
Unpack the equipment and remove shipping carton and all the packaging materials.
DO NOT
lift the using
the front panel and rear panel.
C300R PACKAGING
C300R BOX CONTENTS CHECKLIST
C300R Series UPS
C12 Input Cable
C13 Output Cable
USB A to B
Software CD
Quick Start Guide
Warranty Card
PLEASE ENSURE ALL SAFETY INSTRUCTIONS HAVE BEEN OBSERVED AND UNDERSTOOD PRIOR TO UNPACKING AND
INSTALLING THE UPS
IF THE DEVICE IS DAMAGED, PLEASE NOTIFY THE CARRIER IMMEDIATELY
PACKING MATERIALS MUST BE DISPOSED OF
IN COMPLIANCE WITH ALL LOCAL WASTE
MANAGEMENT REGULATIONS.
RECYCLING SYMBOLS ARE PRINTED ON THE
PACKING MATERIALS TO FACILITATE
SORTING.
IF ANY OF THE ITEMS ARE MISSING FROM THE UPS BOX PLEASE NOTIFY YOUR SUPPLIER
DO NOT FORGET TO REGISTER THE UPS WARRANTY
WWW.CERTAUPS.COM/SUPPORT/WARRANTY-REGISTRATION/
