54
5 Basic and Advanced Operations
In addition to setting the initial setup values described in Chapter 4, the RemoteAdmin tool lets you
perform basic and advanced operations. This chapter describes how to use RemoteAdmin to per-
form these operations.
Topics in this chapter are:
•
•
“Logging into RemoteAdmin” on page 54
•
“Performing Basic Operations” on page 57
•
“Performing Advanced Operations” on page 70
Overview
RemoteAdmin operations are organized into the following categories:
•
Basic Operations — activities that are performed for day-to-day management. Basic opera-
tions include verifying, erasing, and ejecting the physical tape, removing the virtual tape,
importing a physical tape, and changing virtual tape name and bar code settings. See
“Performing Basic Operations” on page 57.
•
Advanced Operations — activities associated with the CP 3100’s advanced features.
Advanced operations include using a new physical cartridge, removing a virtual cartridge,
and sending email to primary and secondary recipients. See “Performing Advanced Opera-
tions” on page 70.
•
System Operations — activities associated with retrieving information from the CP 3100. Sys-
tem operations include deleting inactive inventories, viewing the System Log, viewing mes-
sages, and updating firmware. See Chapter 6, “Performing System Operations” on page 74.
Logging into RemoteAdmin
The following procedure describes how to log into RemoteAdmin.
NOTE: RemoteAdmin supports one login at a time. If a second login is attempted, the actions
described under “Logging in While Someone Else is Logged in” on page 43 occur.
