Certa POWERPLUS CT20VLNTRMA, Руководство пользователя

Страница: 4 / 16

•
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent to avoid a hazard. Cease use and contact help.kogan.com before
further use.
• It is recommended that appliances should be supplied via a residual current device
(RCD) with a tripping current of not more than 30mA.
Personal Safety
•
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
alcohol, drugs, or medication. A momentary lapse of attention while operating
power tools may result in serious personal injury.
•
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to a power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that
have the switch on invites accidents.
•
Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
•
Dress appropriately. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
Power Tool Use and Care
• Do not force the power tool.
Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn it on and off.
Any power tool
that cannot be controlled with the switch is dangerous and must be repaired
•
Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories or storing
power tools.
Such preventive safety measures reduce the risk of starting the power
tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.