background image

 
 
 
 
Before operating the polisher, carefully read through and understand all the safety 

information and warnings in this user guide.  Failure to follow all instructions may result in 
electric shock, fire and/or serious personal injury. 

 
Important Information 

 

Always wear eye protection when using any power tool. 

 

The operation of a power tool can result in foreign objects being thrown into your 

eyes which could be harmful. Before using, always wear safety goggles or safety 
glasses. Eye protection with side shields is recommended for maximum protection. 

 

Do not wear loose clothing or jewellery and always tie back long hair while 
operating a power tool  

 

Work Area 

 

Keep your work area clean and well lit. Cluttered benches and dark areas invite 
accidents. 

 

Do not operate power tools in explosive atmospheres, such as in the presence of 

flammable liquids, gases or dust. Power tools create sparks which may ignite the 

dust or fumes. 

 

Keep bystanders and children away while operating a power tool. Distractions can 

cause you to lose control. 

 

Electrical Safety 

 

Never remove the grounding prong or modify the plug or tool in any way.  

 

Do not use any adaptor plugs. Check with a qualified electrician if you are in doubt 
as to whether the outlet is properly grounded.  

 

If the tool should electrically malfunction or break down, grounding provides a low 
resistance path to carry electricity away from the user. 

 

Avoid contact with grounded surfaces such as pipes, radiators, ranges, or 
refrigerators. There is an increased risk of electric shock if your body is grounded. 

 

Do not expose power tools to rain or wet conditions. Water entering a power tool 
will increase the risk of electric shock. 

 

Do not abuse the power cord. Never use the cord to carry the tools or pull the plug 
from the outlet. Keep cord away from heat, oil, sharp edges or moving parts. 
Replace damaged cords immediately. 

 

Damaged cords increase the risk of electric shock. 

 

When operating power tools outside, always use an outdoor extension cord rated 
for outdoor use. 

 

Power tool plugs must match the outlet. Avoid body contact with earthed or 
grounded surfaces such as pipes, radiators and refrigerators.  There is an increased 
risk of electric shock if your body is earthed or grounded. 

         SAFETY & WARNINGS 

Содержание CTVSORBWAXA













Отзывы: