Spray Cup for Doors/Windows
As shown in Figure 4 and Figure 5, install the two small hooks of the spray cup
for doors/windows, then connect the trigger for the big hook. Then push the
spray cup for doors/windows up and attach it onto the body of the general
spray nozzle.
Fig. 4
Fig. 5
Refilling Water during Operation
1. Unplug the power cord and disconnect the unit entirely from the power
supply.
2. Press the steam button down to release all pressure until steam is no
longer being ejected from the unit.
3. Slowly unscrew the safety cap but DO NOT remove it. Residual steam
vapors will be discharged slowly, then eventually no more steam will come
out. Place the unit in a cool location to allow it to cool further for five
minutes. Finally, completely remove the safety cap.
4. Use the funnel and measuring cup to refill a suitable quantity of cold or
hot water into the tank.
5. Replace the safety cap onto the unit and tighten it back into position.
After Use
1. Once the job has been completed, unplug the power cord and disconnect
the unit entirely from the power supply.
2. Press the steam button down to release all pressure until steam is no
longer being ejected from the unit.
3. Slowly unscrew the safety cap but DO NOT remove it. Residual steam
vapors will be discharged slowly, then eventually no more steam will come
out. Place the unit in a cool location to allow it to cool further for five
minutes. Finally, completely remove the safety cap.
4. Empty residual water from the tank and clean the external surface with a
dry cloth.
5. Replace the safety cap back onto the unit, and tighten it into position.
If you have any further issues or questions regarding use of this product,
please contact the Kogan customer support team.
5
