Certa CTJMPST13WA, Руководство пользователя

Страница: 9 / 12

Step 3b (optional):
Force start function.
• Make sure that the clamps are connected to the correct polarity battery terminal.
• Hold the force start button for 3 seconds to enable the force start function.
• When the indicator light of the smart clamp is solid green, the vehicle will need to
be started within 30s.
Step 4:
Once your car is started, remove the battery clamp from the car battery and the
jump starter within 30 seconds.
LED Indicator Situation
Flashing between red/green Ready to work/operational status
Solid red
1. Battery clamp is connected in reverse:
o
Check the orientation of the clamps on the
battery terminals
2. The clamp is short-circuited:
o Check whether the clamps are contacting one
another or are connected to the same piece of
metal.
3. Reverse charging protection; the voltage of the car
battery is higher than 12.6V:
o
No jump starting is needed to start the car.
Rapidly flashing red
The temperature of the clamp exceeds 65 (+/-5) degrees.
Remove the clamp until the lights flash red and green.
Slowly flashing green
The voltage of the jump starter is too low. Charge the
jump starter
Force start button