FUEL
•
Mix unleaded petrol with air-cooled 2-stroke engine oil at a ratio of 25:1
•
These engines are certified to run on unleaded fuel.
•
Make sure to use petrol with a minimum octane level of 93RON.
•
If you use petrol with a lower octane value than prescribed, there is a danger that
the temperature may rise and piston seizing may occur.
•
Unleaded petrol is recommended to reduce contamination in the air for the sake
of health and the environment.
•
Poor quality fuel or oil may damage sealing rings, fuel lines or the fuel tank.
CHAIN OIL
•
Use motor oil SAE #10W-30 all year round, or SAE#30~#40 in summer, and SAE
#20 in winter.
Safe Operating Precautions
Before operating the engine for the first time, please review the
SAFETY INFORMATION
and the
BEFORE OPERATION CHECKS
!
•
Hold equipment firmly and safely with both hands at all times!
•
Work thoughtfully and do not expose anybody to risk while in operation. Be calm
and considerate when working.
•
Do not work unless the visual and lighting conditions are good.
•
Keep your eye on the cutting head at all times!
•
Never work while standing on a ladder.
•
Work on firm and stable ground or flooring at all times!
•
In the course of work procedure, make sure that no people or animals are
standing with a 10 metre diameter. Switch the unit off immediately if anybody
enters within the reach of the unit.
•
Use unit during daytime only.
Starting the Engine
1 – Feed fuel into the fuel tank and tighten the cap securely. (For the Pole chainsaw, also
feed chain oil into the oil tank and tighten the cap securely.)
2 – Rest the unit on a flat, firm surface. Keep the cutting head off the ground, and clear
of surrounding objects, as it will start rotating upon starting the engine.
15
Fuel
Chain Oil
Содержание CTGDN5IN1CUTA
Страница 1: ......
