Certa CTCHSH350WA, Руководство пользователя, Страница: 5 / 24

•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to seize and are easier to control.
•
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
•
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control
of the tool in unexpected situations.
Service
•
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
•
If the replacement of the supply cord is necessary, please contact Kogan.com for
support.
Safety instructions for cut-off machines
Cut-off machine safety warnings
•
Position yourself and bystanders away from the plane of the rotating wheel. The
guard helps to protect the operator from broken wheel fragments and accidental
contact with wheel.
•
Use only bonded reinforced cut-off wheels for your power tool. Just because an
accessory can be attached to your power tool, it does not assure safe operation.
•
The rated speed of the accessory must be at least equal to the maximum speed
marked on the power tool. Accessories running faster than their rated speed can
break and fly apart.
•
Wheels must be used only for recommended applications. For example: do not
grind with the side of a cut-off wheel. Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to these wheels may cause them to shatter.
•
Always use undamaged wheel flanges that are of correct diameter for your
selected wheel. Proper wheel flanges support the wheel thus reducing the
possibility of wheel breakage.
•
The outside diameter and the thickness of your accessory must be within the
capacity rating of your power tool. Incorrectly sized accessories cannot be
adequately guarded or controlled.
•
The arbour size of wheels and flanges must properly fit the spindle of the power
tool. Wheels and flanges with arbour holes that do not match the mounting
hardware of the power tool will run out of balance, vibrate excessively and may
cause loss of control.
•
Do not use damaged wheels. Before each use, inspect the wheels for chips and
cracks. If the power tool or wheel is dropped, inspect for damage or install an
undamaged wheel. After inspecting and installing the wheel, position yourself and
bystanders away from the plane of the rotating wheel and run the power tool at
maximum no load speed for one minute. Damaged wheels will normally break
apart during this test time.