CHARGING THE JUMP STARTER
1. Plug the home adapter into your house or office wall socket.
2. Connect the home adapter to the 12V 1A input port of the jump starter.
or
1. Plug the car adapter into the cigarette lighter socket in your car/truck/boat.
2. Connect the car adapter to the 12V 1A input port of the jump starter.
TO JUMP START A VEHICLE
1. Make sure the number of indicator lights is at least 3 (60% charged).
2. Connect the jumper cable red clamp to the vehicle's positive (+) battery terminal, then
connect the black clamp to the vehicle's negative (-) battery terminal.
3. Plug the cord of the jumper cable into the jump start socket.
4. Start the vehicle.
5. When the vehicle has successfully started, remove the jumper cable from the jump starter
unit, then disconnect the red clamp from the positive battery terminal, followed by the black
clamp from the negative battery terminal, all within 30 seconds.
6. Leave the vehicle engine running.
