Certa 500W 85mm Mini Circular Saw, Руководство пользователя

Страница: 12 / 15

the blade.

The soleplate must not jam and must return to its initial position after the operation
has been completed.

Before you use the electric mini circular saw, check the function of the soleplate with
the mains plug disconnected.

Before you use the machine, ensure that the safety equipment such as the soleplate,
flanges and adjustment devices are in working order and are correctly adjusted and
secure.
 You can connect a suitable dust extraction system to the dust extraction adapter.
Ensure that the dust extraction system is safely and correctly connected.
Important! Always pull out the power plug before doing any work on the circular saw!
Using the electric mini circular saw
 Select a suitable blade for the material you wish to saw.
 Check the condition and sharpness of the blade.
 Set the cutting depth.
 Pick up the tool and make sure that no air vents are covered.
 Switch on the tool and wait for a few seconds for the blade to reach operating speed.
 Press the locking button and applying a little pressure, slowly lower the tool into the
workplace.
 Push the saw forwards through the workplace. Never cut backwards!
 Exert only little pressure on the tool when cutting.
 The base plate must always lie flat on the workplace.
 Before you start your sawing work on the workplace, you can raise the soleplate with
the lever. Starting the sawing work is easier when you want to begin at the edge of a
workplace.
Switch ON/OFF
To switch on: Slide the ON/OFF switch backwards and hold.
To switch off: Release the ON/OFF switch.
Important! Carry out a trial cut in a piece of waste wood.