Cerrowire ReelRover, Руководство пользователя и инструкции по эксплуатации

Страница: 40 / 48

40
ReelRover Lock-out Procedure
The ReelRover is equipped with a lock-out feature. If any of these conditions occur, lock-out the
ReelRover and contact Cerrowire at 1.800.367.2906:
▪
For shipping
▪
The unit is not functioning normally
▪
The unit has been damaged
▪
The unit has failed any points on the Equipment Inspection Checklist
▪
Troubleshooting has failed to correct a problem
A lock and key are stored in a box inside the User Manual Canister. The key cannot be removed unless
the lock hasp is closed.
When locked out the ReelRover cannot be moved or used until the machine has been serviced or
repaired and the lock-out removed. To lock-out the ReelRover:
1. Position the ReelRover on a level surface
2. Place both gear shift levers to PARK
3. Remove the lock-out cable, lock, and key from the User Manual Canister
4. Thread the cable through the lock-out eye bolt on the drive wheel nearest the User Manual Canister
(Figure 57, left and center)
Figure 57: Lock-out Connections
5. Thread the cable through the conductor reel and ground reel
6. Attach the lock to the two wire ends and close the hasp (Figure 57, right)
7. Remove the key and place it inside the lock box
8. Place the lock box into the User Manual Canister