9
MultiFix
Temperature units
The following temperature units are available: °C, °F, or °K.
Press
to open the menu. Step down with
and select “Setup” using
.
Step down in the menu with
. Select “Temp. unit” and confirm your
selection with
. Step up with
or down with
and select the desired
unit (C, F, K). Confirm with
. If all settings are complete, back out of the
menu with
until the menu closes.
Measuring units (concentration)
The following units are available to display the measurements: g/l, mg/l, %, and ppm.
Press
to open the menu. Step down with
and select “Setup” using
.
Step down in the menu with
and select “Conc. unit”. Confirm with
.
Step up with
or down with
and select the desired unit (g/l, mg/l, %,
ppm). Confirm with
. If all settings are complete, back out of the menu
with
until the menu closes.
Outputs
The output menu can be used to configure connected sensors. There are four 4-‐20 mA
signal outputs available in total. Normally, two outputs are used per sensor, one for the
measurement and one for the temperature. (Fig. 9).
Fig. 9