Cerio OW-200N2, Руководство пользователя

Страница: 162 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
162
6.3 Configure Wireless General Setting
The administrator can change the data transmission, channel and output power settings
for the system. Please click on
Wireless -> General Setup and follow the below setting.
6.3.1 General Setup
6.3.1.1 Band Mode : Select an appropriate wireless band; bands available are
801.11aor 802.11a/n mixed mode.
6.3.1.2 Transmit Rate Control : Select the desired rate from the drop-down list;
the options are auto or ranging from 6 to 54 Mbps for 802.11a.
6.3.1.3 Tx Power : You can adjust the output power of the system to get the
appropriate coverage for your wireless network. Specify digit number between
1 to 100 (the unit is %) for your environment. If you are not sure of which
setting to choose, then keep the default setting, 60%.
6.3.2 HT Other
When Band Mode select in 802.11a/n mixed mode , the HT(High Throughput)
settings should be shown-up immediately.
6.3.2.1 HT TxStream/RxStream : By default, it's 2 .