V3.0
5.5.2
IP Filter
Can allow or deny filter ingress or egress packets from specific source and/or to destination IP
address on wired (LAN) or Wireless (WAN) ports. Filter rules could be used to filter unicast or
multicast packets on different protocols as shown in the IP Filter Setup. Important to note that IP
filter rules has precedence over Virtual server rules.
Total of
20
rules maximum allowed in the IP
Filter List. All rules can be edited or removed from the List.
Please click
Edit
button to setting IP filter.
Active:
Administrator can select Enable or Disable the service.
Comment:
Enter the
description of IP filter rule.
Policy:
Administrator can select the IP flow rule of Deny or Pass.
In/ Out:
Administrator can select the IP flow rule of In/out bound.
Protocol:
Set used service Port of
TCP
,
UDP
or
ICMP
.
Source Address/Mask:
Enter desired source IP address and netmask. i.e. 192.168.2.10/32 or
192.168.2.10/255.255.255.0
Source Port:
Enter a port or a range of ports as
start:end
. i.e. port 20:80
Destination Address/Mask:
Enter desired destination IP address and netmask.
i.e.
192.168.1.10/32 or 192.168.2.10/255.255.255.0
Destination Port:
Enter a port or a range of ports as
start:end.
i.e. port 20:80
Listen:
Select Enable radial button to match TCP packets only with the SYN flag.
Содержание OW-200 A1
Страница 1: ...V3 0 CERIO Corporation CenOS 5 0 User Manual for OW 200 A1 OW 218 A1...
Страница 12: ...V3 0 Client Bridge Repeater Mode Please click on System Mode Setup and choose Client Bridge Mode...
Страница 109: ...V3 0 View Once complete administrators can click the View button to monitor AP statuses and locations...
