V1.0a
Action:
Administrator can select the action taken upon a match.
Permit:
This is forwards packets that meet the ACE criteria.
Deny:
This is drops packets that meet the ACE criteria.
Shutdown:
This is disables the port from where the packets were received.
Source MAC:
If select any then all source addresses are acceptable or select administrator
defined to enter a source MAC address or a range of source MAC addresses.
Destination MAC:
If select any then all destination addresses are acceptable, or select
administrator defined to enter a destination MAC address or a range of destination MAC
addresses.
Note
Set F is show value, 0 is mask value, E.g. If an MAC is 8C:4D:EA:11:22:33 the mask
value FF:FF:FF:00:00:00 indicates that only the first three bytes of the destination
MAC address are used(8C:4D:EA).
Ethertype:
Enter the frame Ethernet type to be matched.
VLAN:
Enter the number of the VLAN tag to match.
802.1p:
Check Include to use 802.1p, administrator need enter the 802.1p value to be added to
the VPT tag and set mask.
12.3
IPv4 ACL
This page mainly creates IPv4 ACLs profile. The IPv4 ACLs are used to check IPv4 packets, while other
types of frames, such as ARPs, are not checked.
ACL Name:
Create a name of ACL.
ACL Table:
Display created IPv4 ACL name list.
Содержание CS-2424G A2S
Страница 7: ...V1 0a...
Страница 114: ...V1 0a...