Cerio CS-2424G A2S, Руководство пользователя

Страница: 27 / 114

V1.0a

System Priority: Administrator configures the LACP system priority on each switch running
LACP. LACP uses the system priority with the switch MAC address to form the system ID and
also during negotiation with other switches.
The function with the lower system priority value determines which links between LACP
partner devices are active and which are in standby for each LACP group. The device on the
controlling end of the link uses port priorities to determine which ports are bundled into the
aggregated bundle and which ports are put in standby mode. Port priorities on the other
device (the no controlling end of the link) are ignored. In priority comparisons, numerically
lower values have higher priority. Therefore, the system with the numerically lower value
(higher priority value) for LACP system priority becomes the controlling system. If both devices
have the same LACP system priority (for example, they are both configured with the default
setting of 32768), the device MAC address determines which switch is in control.
5.4 EEE
This switch support Energy-effcient Ethernet(EEE) function. Administrator can choose Enable or
Disable EEE function. The default is “Disable”.