HY08AC Touch Screen Thermostat User Manual
Many thanks for your selection of our products and services, and also for your trust and support to us.
HY08AC-1
HY08AC-2
HY08AC-3
HY08AC-4
Application
HY08AC fan coil units thermostat is used for control room temperature in central air
conditioning fan coil units system.By comparing room temperature with setting temperature to
open and close fan coil units and motorized valve in the end of air conditioning system,to
achieve purpose of adjusting room temperature,comfort and saving energy. HY08AC-1 uses
microprogrammed control unit,large LCD display,LCD display mode:working mode
(cooling,heating,ventilation), fan speed (high,middle,low, auto),room temperature,setting
temperature,time,7 days 4 period programming,timing turn on/off etc.
Technical Data
Power Supply
220V 50/60Hz
Installation
Flush Installation
Rated current
3A
Sensor
NTC
Set Point Range
5~35
℃
Accuracy
±0.5°C
Ambient
0~50
℃
Protection Class
IP30
Size
86*86*14
Housing
PC+ABS plastic
Ambient temperature
0°C~50°C
Storage temperature -10°C-60°C
Operation Key
NO.
symbols
represent
A
Increase key:adjust temperature and value
B
Setting key
C
Decrease key:adjust temperature and value
D
Fan speed key;
+
is confirm key
E
Turn ON/OFF
Displays & Buttons
Operation Instruction
Operation
Description
Turn ON/Turn
OFF
Press“
”key one time to turn on,press it again to turn off and close fan
coil units and motorized valve.
Setting
Temperature
In turn on state,press “
”to decrease temperature and press“
”to
increase temperature,press every time,temperature change 0.5
℃
.
Fan Speed
Choice
In
turn
on
state,press“
”
to
choose
fan
speed
(High
),(Middle),(Low ),(
).
Time Setting
In turn on state,long press“
”for 3-5seconds to enter into setting screen,
choose “
” icon,press “
” confirm to time setting:minute
“mm”flashing,press “
”or“
”to adjust value, press “
” confirm to
next setting;hour “hh”flashing, press“
”or“
”to adjust value;press
