Ceragon FibeAir IP-20C-HP, Руководство по установке

Страница: 151 / 204

Installation Guide for FibeAir IP-20C-HP
Page 151 of 204
Ceragon Proprietary and Confidential
Left
Left
Right
Right
Figure 41: Left and Right Rail Configurations Together
Connecting the OCU to the IP-20C-HP Radio
Attach the M5 captive screws on the radio to the OCU kit, as shown in Figure 42 .
Partially fasten the screws, without tightening them, in a diagonal fashion as
shown in
Figure 43 . Once all the screws have been partially fastened, tighten all
the screws in the same order, using 5.5 Nm torque.
1
3
1
6
4
8
7
2
5
3
Figure 42: Attaching the Radio to the OCU Figure 43: Order of Fastening Screws