Ceragon FibeAir IP-20 All-Outdoor Series, Руководство пользователя

Страница: 265 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 265 of 825
Ceragon Proprietary and Confidential
Table 45 describes the parameters displayed in the Ethernet Services page.
Table 45: Ethernet Services Page Parameters
Parameter Definition
Services ID A unique ID for the service.
Service Type The service type:
•
MP – Multipoint
•
P2P – Point-to-Point
•
MNG – Management
Service sub type Indicates the type of service ( Ethernet ).
EVC ID The Ethernet Virtual Connection (EVC) ID. This parameter does not affect the
network element’s behavior, but is used by the NMS for topology
management.
EVC description The Ethernet Virtual Connection (EVC) description. This parameter does not
affect the network element’s behavior, but is used by the NMS for topology
management.
Admin Indicates whether the service is enabled ( Operational ) or disabled ( Reserved ).
You can configure services for later use by defining the service as Reserved . In
Reserved mode, the service occupies system resources but is unable to
transmit and receive data.
6.1.4 Adding an Ethernet Service
To add an Ethernet service:
1 Select
Ethernet > Services . The Ethernet Services page opens ( Figure 196 ).
2 In the Ethernet Services page, click Add . The Ethernet Services – Add page
opens.