FibeAir® IP-10C
Installation Guide
Ceragon Proprietary and Confidential
Page 50 of 63
3.7
2+0 Dual Polarization (DP)
– Direct Mount Installation
ACDP
Note:
This is not an XPIC configuration.
A 2+0 DP IP-10C configuration requires installation of an Orthogonal Mode
Transducer (OMT).
Important!
Do not remove the transparent pressure window located on
the OMT ports !
The following components are necessary for a 2+0 DP installation:
Item
Description
Quantity
Remarks
1
ANTENNA OMT ADAPTOR 1
2
RFU-C OMT
1
3
IP-10C
2
1.
Prior to the installation, follow the antenna manufacturer’s instructions to
switch to a circular adaptor (remove the existing rectangular adapter,
swap the O-ring, and install the circular adaptor in its place).