To open stroller:
• Stand stroller upright and
pull out on
Red Frame
Latch
while opening.
• Spread handle and rear
legs until both
Fold Locks
“click”
into position.
ASSEMBLY
3
Opening Stroller
WARNING
Prevent a possible choking hazard, discard
axle protectors and polybag which contained
rear wheel parts.
To attach rear axle and brakes:
• Remove axle protectors from
ends of axle and discard.
•
With stroller laying face
down on floor, slide brake
lever brackets onto rear legs
until they “
click”
in place.
NOTE:
Brake levers
must
face
rear of stroller.
To attach wheels to rear axle:
• Slide
Wheel
onto end of
Axle
with brake ribs facing in.
• Push
Wheel Retainer
onto end of
Axle
. Make sure large
end of
Wheel Retainer
is towards
Wheel
.
Wheel Retainer
should snap into groove on end of
Axle
.
• Snap wheel
Retainer Cap
over
Wheel Retainer
.
• Line up slot in
Hub Cap
with rib on
Wheel
and snap
Hub Cap
in place.
Rear Axle and Wheels
CAUTION:
• Failure to install retainer cap may cause wheels to come
off of stroller.
• After wheel assembly is complete, pull on wheels to
check that they are locked into place.
Hub
Cap
Retainer
Cap
Wheel
Retainer
Wheel
Axle
Fold
Locks
Red Frame
Latch