3
CAUTION
After reading these instructions if you have any doubt about your ability to
complete your installation in a professional like manner you should obtain the
services of an installer versed in all aspects as to the correct and safe
installation
DO NOT
use temporary makeshift compromises during installation.
ABOUT YOUR APPLIANCE
1.
HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.
CONTACT MAY CAUSE SKIN BURNS.
2.
DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS.
3. Check with the building inspector's office for compliance with local codes; a permit may be
required.
4. This appliance requires installation in a masonry type fireplace only.
DO NOT INSTALL IN
A FACTORY BUILT FIREPLACE SUCH AS A ZERO CLEARANCE.
5. Always connect this unit to a chimney and
NEVER
vent to another room or inside a
building.
6.
DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM.
7.
DO NOT
connect this unit to a chimney flue serving another appliance.
8. A stainless steel chimney liner may be required. Check with local building, fire officials or
authorities having jurisdiction in your area.
9.
DO NOT USE CHEMICALS OR FLUIDS TO START THE FIRE.
10. The connector pipe and chimney should be inspected periodically and cleaned if
necessary.
11. Remember the clearance distances when you place furniture or other objects within the
area.
DO NOT
store wood, flammable liquids or other combustible materials too close to
the unit.
12. Contact your local municipal or provincial fire authority for information on how to handle a
chimney fire. Have a clearly understood plan to handle a chimney fire. In the event of a
chimney fire, turn air control to closed position and
CALL THE FIRE DEPARTMENT.
13.
DO NOT
tamper with air control beyond normal adjustment.
14. Once the required draw is obtained, operate only with doors closed and open doors slowly
when re-fueling. (This will reduce or eliminate smoke from entering the room). These units
are not mobile home approved.
Do not
install this unit in a mobile home or trailer.
