7 • Owner’s manual - Model. CC1212
9) Long Term Maintenance - Full Green LED ON
During long term maintenance / float mode, the unit will apply a special pulse charge to ensure
the battery is kept in optimal condition.
STEP 4 - Disconnecting the Battery charger from Battery
•
If the Battery is out of the vehicle:
(1) Switch OFF and Remove the AC Power Socket from the outlet.
(2) Remove the Black lead and then the Red lead.
•
If the battery is still in the vehicle:
(1) Switch OFF and Remove the AC Power Socket from the outlet.
(2) Remove the lead from the vehicle chassis.
(3) Remove the lead from the battery.
Note:
Check electrolyte levels if possible after charging as they may need topping up with distilled
water. (This does not apply to sealed maintenance free batteries)
LED STATUS INDICATOR TABLE:
LED
Status
Description
Battery Type LED’s
Green
ON
Indicates which Battery Type is selected
Charge Rate LED’s
Green
ON
Indicates which Charge Rate / Charge Mode is selected
Charging Status LED’s
Full Green
Flash/ON Flashing if Analysis failed or ON if fully charged - Float / Maintenance mode
Absor. Green Flash/ON Flashing during equalisation charging or ON during Absorption charging
Bulk Blue
Flash/ON Fast Flash - Rejuvenation / Slow Flash - Soft Start charging / ON - Bulk charging
Fault LED
Red
ON
Short circuit/reverse polarity or Rejuvenation failed if Bulk LED also flashing slow
Red
Flashing
Over temperature protection mode / Soft start charging timed out if Blue Bulk
LED also flashing fast / Bulk charging timed out if Blue Bulk LED also ON
Note:
When the unit is in ultra low power consumption mode (ECO Mode), this will be indicated by both the
Charge Rate and Battery Type LEDs flashing.
RED
BLACK
RED
BLACK
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
Gel
Ba
tter
y
type
12A
8A
12A
8A
12A
8A
12A
8A
12A
8A
