Century Helicopter Products Hummingbird Elite Series CP Скачать руководство пользователя страница 2

2

Items needed to fly the Hummingbird
1x Radio (4 channels FP, 6 channels CP)
1x Receiver (4 channels FP, 6 channels CP)
2x Micro servos (FP)
3x Micro servos (CP)
1x Century micro gyro
1x Hummingboard mixer/speed control
1x Battery (8.4V or 9.6V)
1x Wall charger (NiMH type)
(CP= Collective Pitch) (FP=Fixed Pitch)

Introduction

Introduction

Introduction

Introduction

Introduction

Thank Y

Thank Y

Thank Y

Thank Y

Thank You F

ou F

ou F

ou F

ou For Choosing The Hummingbird

or Choosing The Hummingbird

or Choosing The Hummingbird

or Choosing The Hummingbird

or Choosing The Hummingbird

ELite Series Helicopter F

ELite Series Helicopter F

ELite Series Helicopter F

ELite Series Helicopter F

ELite Series Helicopter From Century!

rom Century!

rom Century!

rom Century!

rom Century!

Introduction

Congratulations on the purchase of Century Helicopter Product’s new
Hummingbird Elite series helicopter. The Hummingbird Elite is not only ideal
for beginners new to the hobby, but also for the intermediate to expert pilot
looking for the ultimate in micro electric helicopter performance.  A simple 4
channel “airplane” radio is all that is necessary to successfully fly the FP
(Fixed Pitch) version.  The CP (Collective Pitch) version requires a 6+
channel computer radio that supports 120 degree eCCPM operation.  Please
check with your favorite retailer or manufacturer to verify compatibility of your
radio system of choice.

Century Helicopter Products

1740-C Junction Ave.

San Jose, CA 95112

Tel: (408) 451-1155

Fax: (408) 451-1156

Web:www.centuryheli.com

Warning

This radio controlled model is not a toy!  It is a precision machine requiring proper assembly and setup to avoid
accidents.  It is the responsibility of the owner to operate this product in a safe manner as it can inflict serious injury.

The helicopter is made pre-assembled and will require inspection for construction before your first flight.

As the manufacturer, we assume no liability for the use of this product.

Table of Contents

Table of Contents & Introduction ............................................................ 2

Required Items and Building Guide for Assembly ................................. 2

Getting started .......................................................................................... 3

Installation and diagnostics for electronics ........................................... 4-6

Hummingbird CP Pitch Setup .................................................................. 7

Radio Installation Battery Mounting and Motor break in ....................... 8

Blade Tracking, Questions and answers Section .................................. 9

Your first Flight ......................................................................................... 10

Replacement Parts (diagram) .................................................................. 11

Replacement Parts and Options .............................................................. 12

The introduction

Sections

Collective and fixed pitch

Collective pitch only

Fixed pitch only

R

R

R

R

Rules Of R/C

ules Of R/C

ules Of R/C

ules Of R/C

ules Of R/C

-Always turn your transmitter
on before powering the
model.

-Always turn off the model by
disconnecting the helicopter
battery prior to turning off the
transmitter.

-Always start your helicopter
with the throttle in the lowest
position.

-Always perform a pre-flight
inspection for safe operation.

These rules will help prevent
unsafe operation.

R

R

R

R

Required Items

equired Items

equired Items

equired Items

equired Items

Содержание Hummingbird Elite Series CP













Отзывы: