manualshive.com logo in svg

Century Helicopter Products Bell 47G II ARF Helicopter, Руководство пользователя

Поделиться
Скачать
Century Helicopter Products Bell 47G II ARF Helicopter Скачать руководство пользователя страница 1

PLEASE READ THIS FIRST

CN1074 & CN1074A Bell47G II  Detail Manual Updates

Step 12

The direction of the landing gear mounts are backwards in the original instructions, when attaching the hori-

zontal straight struts to the plastic vertical struts, make sure that the mounting tabs are pointing inwards. Oppo-

site to what is shown in the photo.

Step 14

The photo showing the landing gear mounted to the mechanics is backwards, see Step 12 and replace the

original four self tapping screws with M3x12 self tapping screws.

Step 18

Two M2x8 are provided as they are missing from the hardware for this step.

PLEASE READ THIS FIRST

CN1074 & CN1074A Bell47G II  Detail Manual Updates

Step 12

The direction of the landing gear mounts are backwards in the original instructions, when attaching the hori-

zontal straight struts to the plastic vertical struts, make sure that the mounting tabs are pointing inwards. Oppo-

site to what is shown in the photo.

Step 14

The photo showing the landing gear mounted to the mechanics is backwards, see Step 12 and replace the

original four self tapping screws with M3x12 self tapping screws.

Step 18

Two M2x8 are provided as they are missing from the hardware for this step.

PLEASE READ THIS FIRST

CN1074 & CN1074A Bell47G II  Detail Manual Updates

Step 12

The direction of the landing gear mounts are backwards in the original instructions, when attaching the hori-

zontal straight struts to the plastic vertical struts, make sure that the mounting tabs are pointing inwards. Oppo-

site to what is shown in the photo.

Step 14

The photo showing the landing gear mounted to the mechanics is backwards, see Step 12 and replace the

original four self tapping screws with M3x12 self tapping screws.

Step 18

Two M2x8 are provided as they are missing from the hardware for this step.

Содержание Bell 47G II ARF Helicopter
















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды